HGH mixing (reconstitution) instruction,
1)Take some alcohol and swab the stopper of your HGH vial and the diluent water.
2)Take a syringe and draw up 1 ml of water (100 markings) into it. Note: regardless of how much water you use (be it 1ml or 2ml) the mixture still has the same overall strength. Water is just a transport method for the HGH. The amount isn’t critical, other than making sure you know exactly how much you have used. The rule of thumb is choose an amount that will make measuring the final product easy.
1ml (cc) added to a 10IU vial of HGH means each 10 mark on U100 syringe equals 1 IU of HGH
2ml (cc) added to a 10 IU vial of HGH means each 20 mark on a U100 syringe equal 1 IU of HGH
3ml (cc) added to a 10 IU vial of HGH means the 30 mark on U100 syringe would equal 1 IU of HGH
3.) You now have 1ml of water in the syringe. Push the needle through the rubber cap of the vial, but position it sideways so that the water will slide down the inside wall of the vial. Do not inject directly into the powder with force, rather let the water slide out slowly.
4.) After all of the water has been added to the vial of HGH, gently swirl (but do NOT agitate or violently shake the vial) until the lyophilized powder has dissolved and you are left with a clear liquid. The HGH is now ready for use. Store your reconstituted HGH in the refrigerator (36 – 46 degrees Fahrenheit or 2-6 degrees Centigrade) it will be good for about about a week.
Now we need to know how to measure the amount for injection right? You need to use a U-100 Insulin Syringe to draw and inject the HGH. Here’s how: since you know the amount of IU’s in your HGH vial and you know how much water you have diluted it with, just divide as listed below: You need to know: 1ml = 1cc = 100 IU’s
So take the number of IU’s of the HGH (the lyophilized powder ) (most common is 10iu’s) divide that into the amount of diluent we used.
We used 1cc or a ml of water; we also have a 10 IU vial of HGH.
We know from above that 1cc = 100 IU’s, so we have 100 IU’s of water.
We now divide the 100 IU’s (the amount of our water) by 10 IU’s (the amount of hGH)
100 IU / 10 IU = 10
This 10 will perfectly correspond with the markings on a U100 insulin syringe. In our example, every 10 mark on the syringe will equal 1 IU of HGH. You want to draw 2 IU’s of HGH? ….Drawing out to the 20 mark on the syringe.